Prices for store pick up
(not including delivery or shipping)
Our finance partners can arrange funding to acquire equipment at competitive rates. We can offer loan, lease and hire purchase agreements to suit our customers needs.
*****We have a handy leasing calculator available on request help identify the monthly costings and tax savings*******
The Tax Benefits of Leasing explained
Leasing converts a large capital expenditure into small monthly payments. Hence the company has the profit-making equipment immediately and keeps their cash reserve available.
Rather than investing the precious cash reserves in depreciating assets, the company can use them to help increase profits.
Lease Rental is 100% Tax deductible
The main reason that the majority of companies lease rather than purchase equipment is that they use leasing as a method of reducing their tax bills. This is because lease rental is 100% tax deductible, and all payments made for the equipment are written off against the company’s tax bill. For any profit making business, this means a substantial saving in the real cost of acquiring equipment by lease rental. This could mean a saving of between 20-40% of the lease payments, depending on the rate of tax you pay*.
Payments on qualifying leases are written off as direct operating expenses, rather than a debt or outstanding liability, thus reducing short term taxable income.
Any capital allowances are passed on to you, and lease payments can be offset against taxable profits. VAT can also be reclaimed on monthly payments. This status as a “lease” as opposed to a “liability” on a company’s balance sheet is something the banks like to see, which is why an operating lease can be attractive. For this reason, leasing is often referred to as ‘off balance sheet’ financing – a tremendous advantage to both large and small businesses
Ownership at the end of the lease
Lease rental is just that, a rental or hire agreement. Title of the goods remains with the Lessor (either Kennet or assigned to a bank), which means the equipment does not show on the companies balance sheet, therefore not needing to be depreciated over a fixed period. If Kennet broker the funding, they are the “third party” involved within the lease agreements. In effect, Kennet buys the equipment from the supplier and then sell it on to the customer. This means that the customer can take full advantage of all the benefits of leasing but still owns it at the end.
The disadvantage of buying equipment outright
The disadvantage to buying equipment out-right, is that the capital invested becomes a depreciating asset. This is an asset that’s value decreases over time.
The total amount that assets have depreciated by during a reporting period is shown on the cashflow statement, and also makes up part of the expenses shown on the income statement. The amount that assets have depreciated to by the end date is shown on the balance sheet.
***************************************************************************************************************************
How the tax advantages of leasing works – in numbers
You lease a machine that costs £5,000 + VAT, over a 3 year term.
The monthly payments would be £162.50 + VAT over 36 months
Total paid over the term of the lease £5850
20% tax can be reclaimed on the total lease payments over the 3 years, so a total of £1170
Therefore the net cost of the lease is £5850 – £1170 = £4680*
***************************************************************************************************************************
*Your accountant will be able to provide more information. This information is provided for guidance only.
For more information, call Mark Suckley and his team at Kennet Equipment Leasing on 01675 469215 or email marksteam@kennet-leasing.co.uk.
All prices are quoted EXWORKS Bacup. You can arrange your own collection or if preferred we can arrange delivery.
We have Transport partners with a variety of vehicles including HIAB. Please enquire for a quotation.
Collections: Edgebander
PLC and ENCODER controlled logic functioning
Complete with:
- Thermostatic glue control with automatic stand-by and glue temperature Indicator
- Light-up LED buttons to select machine operating units
- Diagnostic system with messages for machine use and maintenance
- Statistical operating data: total hours of machine use, total and partial meters of edge used
• Pre milling group with diamond cutterblocks and two (HF) high frequency motors
Variable milling from 0 to 2 mm, adjustable with a knob and numerical dial.
• Pneumatic edge - cutting shear from coil with horizontal oscillatory movement.
• Teflon-coated glue pot allows complete and fast cleaning.
• Automatic Front/Rear End Trimming unit (straight cut) with copiers and integrated chipping collection Optional VR unit for corner rounding
• 3 positions flush trimming unit with 2 (HF) high - frequency
motors. (HF) Z4 Ø 75 mm cutterblocks, Widia knives
Combined profile: Radius/bevel 2 mm
• Front extensible support for large panels with Polizene sliding fences
Other Options:
LOTOUCH ..7’’ touch screen
The first and only figurative control with inmediate understanding
on the market. It is fitted with a figurative interface for programming
and diagnostics. Productivity control in any moment.
User friendly from the first use.
LORIEI Anti-adherence / release agent spraying unit
Makes cleaning of panel surfaces easier by preventing adhesion of
excess glue.
PLC controlled spray function.
Complete with 2 sprayers (lower and upper) and a liquid tank
Please note: mandatory option when PUR glueing unit Is Installed
LOLAMP Infrared lamp for panel pre-heating. Recommended for cold / humid locations
LOFLEX Quick glue pot replacement group. - quick release device for easy and quick glue pot replacement
LOFLEX + Additional glue pot
Complete with external support designed to accommodate up to 2 glueing units in parking position.
Please note: available only in combination with FLEX (cod. LOFLEX) glue unit
LOVS
LOVR
• VS tool for straight / bevel head trimming
• VR tool for straight/radius head trimming.
Removes edge excess on front/rear side of the panel through multi-
profile blades with possibility of having the vertical cut with bevel
(VS version) or radius (VR version). Possibility of independent selection
from PLC of front / rear cut.
Minimum panel length on edged side:
180 mm (panel height = 18 mm)
230 mm (panel height h=45 mm)
- high frequency motor 0,22kW – 12.000 RPM
- integrated chipping extraction system
LOF1 Tool Kit R=1 mm instead of R=2 Replaces standard R=2 mm tools with R=1 mm on the flush trimming unit and VR end trim unit (when fitted on the machine)
LOF3 Tool Kit R=3 mm instead of R=2 mm Replaces the standard R=2 mm tools with R=1 mm on the flush trimming unit and end trim VR unit (when fitted on the machine)
LORASB Edge scraping unit Recommended for plastic edge perfect finishing. Setting with numeric dials, extraction and chipping collector.
LORSCL Glue scraping unit Recommended for removal of any excess glue in the joint area between panel and edge.
LORIEU Cleaning spray agent unit Improves panel cleaning and edge polishing. Complete with 2 sprayers (lower and upper) and a liquid tank.
LOSPA3 Buffing unit Fitted with 2 independent motors (0.13 kW at 1.400 rpm) to guarantee perfect finishing of ABS and PVC edges.
LOLED Internal LED light for illumination of the operating units.
LOMF Single-phase version
LOACSA CSA Version PRICE UPON REQUEST
LOTNEU Trasformer for missing neutral cable
LOT600U Transformer for 600V input voltage (CSA version) PRICE UPON REQUEST
LIGB40 Packaging with crate
LICS40 Packaging with seaworthy case
Feed speed m/min 7
Panel thickness mm min 8 – max 45
Edge thickness in coils mm 0,4 ÷ 3
Edge thickness in strips (manual feeding) mm max 5*
Maximum coil diameter mm 800
Minimum panel length (side being processed) mm 210
Minimum panel width mm 95
PRE-MILLING UNIT
Maximum milling mm 2**
HF motors (High Frequency) kW 2 x 0,75
Dimensions of diamond cutterblocks mm Ø 60 x H54
Tool rotation speed RPM 12.000
GLUEING UNIT
Heating elements power (6 cartridges) kW 1,490 approx.
Glue heating time from ambient temperature min 14 - 16 approx.
Glue heating time from stand-by min 4 – 6 approx.
Glue pot capacity Kg 1
STANDARD END TRIMMING UNIT
Motor power kW 0,22
Blade rotation speed RPM 11.000
FLUSH TRIMMING UNIT
Motor power kW 2 x 0,22
Tool rotation speed RPM 12.000
Please send us your enquiries via the following email form.